Home » Products » Embedded Solar Pavement Marker Lights C2
Embedded Solar Pavement Marker Lights C2
Load Bearing: More Than 40 Tons (can be installed in the middle of the road)
Warranty: 18 Months
Body material: Aluminium(GB-ADC-12)+PC(Japan Brand)
Power supply: USA Brand Flexible High Efficient Solar Panel
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
1.Carefully mark the distance between the placement of Solar pavement marker lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 127mm and depth will be 45mm.
2.Remove all debris from the installation hole.
3.Pour epoxy into the holes per the manufacturer’s instruction.
4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the Solar pavement marker shaft.
5.Set the lighting surface of the Solar pavement marker light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and Solar pavement marker shaft.
6. After curing the Solar pavement marker for 6-8 hours, remove the installation of the isolation facility.